Clatronic dvbt 704 twin Bedienungsanleitung Seite 96

CL_BDA_DVB_T704_GB_ka1.qxd
Carrying out basic settings
Settings
TV Typ
VCR device
TYPE
Start On
Channel
Antenna
Power
Carry out the desired settings.
96
26.01.2006 10:48 Uhr
Options Explanation
PAL/NTSC/ If you are uncertain which television standard
PAL & NTSC/ is the appropriate one, select the setting
SECAM "PAL & NTSC".
PAL/NTSC/ If you are uncertain which television standard
PAL & NTSC/ is the appropriate one, select the setting
SECAM "PAL & NTSC".
Last From the list of channels shown here, you may
select the channel which is to be automatically
called up when the receiver is switched on.
ON/OFF "OFF" means that no voltage is present at the
antenna output – suitable for connection to the
roof antenna and the passive room antenna.
When set to "ON", you may connect an active
room antenna without a separate power supply.
Seite 96