CL_BDA_DVB_T704_GB_ka1.qxd
Connecting an active room antenna
Attention!
Note the specifications in the operating instructions for your
active room antenna under all circumstances. Otherwise the
receiver could become damaged.
To use the receiver with an active room antenna, you must first
activate the voltage at the antenna output (see Page 77). In this
case, the active room antenna draws the necessary current from
the receiver's antenna connection.
Connect the antenna cable's connector to the "ANT IN" (Tuner A
or B) antenna connection on the receiver.
26.01.2006
10:48 Uhr
Seite 79
Connecting the receiver
79