Connecting With A Video Cable - Clatronic dvbt 704 twin Bedienungsanleitung

CL_BDA_DVB_T704_GB_ka1.qxd
Connecting the receiver

Connecting with a video cable

Attention!
Note the specifications for connecting the video cable in the
operating instructions for your TV set under all circumstances.
Due to better transmission quality, we recommend the use of a
SCART cable for connection purposes.
Make the antenna connection of your choice, as described
above.
Insert the video cable into the "VIDEO OUT" jack on the receiver.
Connect the video cable to the TV set.
Insert the cinch cable's cinch connectors into the "AUDIO OUT
R" and "AUDIO OUT L" jacks on the receiver.
Connect the cinch cable to the TV set.
If you would like to connect a video recorder, insert a SCART
cable into the "VCR" SCART connection on the receiver.
Connect the SCART cable to the video recorder.
84
26.01.2006
The video cable (cinch cable) is not included in delivery.
Note the operating instructions supplied for your video
recorder.
10:48 Uhr Seite 84