Clatronic dvbt 704 twin Bedienungsanleitung Seite 119

CL_BDA_DVB_T704_GB_ka1.qxd
FEC – Forward
Error Correction
HDTV
HFC
FTA
Loop-through
MPEG-2
Mute
OSD
PID
QAM
Receiver
SCART
26.01.2006 10:48 Uhr
A technique which lowers the error rate during data
transmission. Additional bits are inserted into the data flow,
so that error correction algorithms can be applied on
reception.
High-Definition Television: For analogue standards.
Development is based on, and is used as the basis for
ffurther developing, the PAL standard to form PAL plus.
Hybrid Fibre Coax: Designation of a hybrid solution in the
connection area of network subscribers in which case glass
fibres are not routed continuously from the station to the
receiver, but in which existing, coaxial copper cable is used
as of a specific point.
Free-to-air services: Fee-free services which can be
received without a special decoder.
The signal which arrives at the input is intercepted again at
the output jack for further distribution.
International standard for transmitting video signals.
Remote control button for deactivating the sound.
On-Screen Display:
Menu control system which is visible on the screen.
Packet Identifier: Identification number of a received data
flow; the PIDs ensure that a station can be received in full.
Quadrature Amplitude Modulation:
Digital modulation process with phase shift keying, which is
used in cable network transmissions.
Receiving device which converts the signals from the
antenna into video and audio signals.
21-pin connector for connecting the TV set to the receiver.
Seite 119
Glossary
119