Yamaha DPX-1 Bedienungsanleitung Seite 25

I Basic submenu operation
[Operation groups A and B]
1.
Select the menu item to be adjusted by following
steps 1—3 in "Basic menu operation".
The submenu mark " " appears on the right side of the item.
IMAGE SIGNAL
COLOR SYSTEM
INPUT A SIGNAL
INPUT B SIGNAL
LANGUAGE
POWER SAVING
LAMP RUNNING TIME
RESET
2.
Press the SELECT or + button to open the submenu.
SELECT
Remote control
IMAGE SIGNAL
LANGUAGE
ESCAPE: EXIT
INITIAL SETUP
AUTO
COMPONENT
RGB PC
ENGLISH
OFF ON
2H.
MEMORY1 VIDEO
SELECT
or
Control panel
INITIAL SETUP
ENGLISH
DEUTSCH
ESPAÑOL
FRANÇAIS
ITALIANO
MEMORY1 VIDEO
3.
Select the submenu parameter by pressing the h or g
button.
SELECT
Remote control
BILD SIGNAL
SPRACHE
ESCAPE: VERLASSEN
Press the RESET button to reset the parameter to the factory
setting. (Items without a factory setting cannot be reset.)
When setting "COLOR SYSTEM", "INPUT A SIGNAL",
"INPUT B SIGNAL", or "R/C SENSOR", the following step
[Operation group B only] is necessary.
[Operation group B only]
Press the SELECT button to confirm the new setting and close
the submenu. Setting cannot be changed for the above items if
not confirmed by the SELECT button.
SELECT
Remote control
To reset the parameter to the factory setting, press the RESET
button when the submenu has been opened.
4.
Press the MENU button to close the menu.
MENU
Remote control
Press the ESCAPE or – button to return to the previous screen
if continuing to adjust settings.
Menu operation
or
Control panel
EINST. AUFST.
ENGLISH
DEUTSCH
ESPAÑOL
FRANÇAIS
ITALIANO
SPEICHER1 VIDEO
SELECT
or
Control panel
MENU
or
Control panel
21
E-