Heatapp! Repeater - heatapp! BASE Installationsanleitung

3.4.4

heatapp! repeater

1. Unpack the heatapp! repeater and plug it into a free 230V outlet
located approximately in the middle between the heatapp! gateway
and the radio modules to be covered.
2. In the menu of the heatapp! gateway select the menu item
"Register / deregister" under "Radio modules" and then
"Deregister". You will be requested to press the learn key on the
heatapp! repeater.
3. Now press the learn key on the side of the heatapp! repeater. If
the heatapp! gateway recognises the heatapp! repeater, you will
be requested to enter a name (e.g. "Top floor repeater").
4. Repeat the connection test according to the description in section
3.4.3 "Connection test".
If you still do not have a working connection to one or more radio
modules, then the wireless range is still insufficient!
• Relocate the heatapp! repeater in another location so that all radio
modules can be reached.
If this does not work, add a further heatapp! repeater to improve
•
wireless coverage.
The heatapp! repeater is not included in the standard scope of delivery; it must be
*
ordered as an accessory.
26 - EN