Heatapp! Gateway - heatapp! BASE Installationsanleitung

A Connect the heatapp! gateway to the customer's LAN network:
• Via a network cable plugged into a free Ethernet port on the
customer's internet router or switch. The maximum total cable
length from the heatapp! gateway to the next switch or router
must not exceed 100 m.
• Alternatively via Wi-Fi connection using the Wi-Fi module
integrated in the heatapp! gateway.
Ask the customer for the access data for their Wi-Fi network.
You will require this in the following set-up steps.
Moreover, inform the customer that future changes to their Wi-
Fi network (new router, changed password, etc.) can impair the
operation of heatapp! and many require an adjustment to the
heatapp! set-up.
B Connect the supplied plug power supply unit to the

heatapp! gateway.

C Plug the power supply unit into a power outlet.
16 - EN