heatapp! BASE Installationsanleitung Seite 52

3.3.3 Initial operation / initial configuration
Fig. 7: Initial set-up heatapp! gateway
1 heatapp! USB-LAN adapter
The initial set-up of the heatapp! gateway is performed based on a
menu control system via the set-up wizard via the browser of the
connected PC / laptop.
DHCP must be enabled in the network settings of the PC / laptop
(automatic address allocation) and no proxy server must be activated.
NOTE
When updating the device software by downloading via the internet
additional costs may be charged depending on the customer's actual
internet tariff.
17 - EN