Initial Operation / Initial Configuration - heatapp! BASE Installationsanleitung

3.2.4

Initial operation / initial configuration

Fig. 5: Initial set-up heatapp! base
1 heatapp! USB-LAN adapter
The initial set-up of the heatapp! base is performed based on a menu
control system via the browser-based set-up wizard of the connected
PC / laptop.
DHCP must be enabled in the network settings of the PC / laptop
(automatic address allocation) and no proxy server must be activated.
NOTE
When updating the device software by downloading via the internet
additional costs may be charged depending on the customer's actual
internet tariff.
13 - EN