heatapp! BASE Installationsanleitung Seite 56

3.4.1.1 heatapp! floor and heatapp! sense registration
Observe the installation instructions for heatapp! floor and
heatapp! sense!
Registering with the heatapp! gateway A, B:
1. In the menu of the heatapp! gateway select the menu item
"Register / deregister" under "Radio modules" and then "Register".
You are requested to press the learn key (Fig. 8, item 2).
2. Press the learn key (Fig. 8, item 2) for 2 seconds (see also section
3.4.1.2 "Functions of the learn key", line "b").
3. For heatapp! sense only:
As soon as the heatapp! gateway detects the heatapp! sense,
you are requested to assign a room and a name (e.g. Left wall) to
the wireless room sensor.
For heatapp! floor only:
As soon as the heatapp! gateway detects the heatapp! floor, you
will be requested to enter a name (e.g. Ground floor).
4. Check in the menu of the heatapp! gateway under "Radio
modules", whether the heatapp! floor or heatapp! sense have
been successfully registered or deregistered and assign the rooms
to the individual channels of heatapp! floor that were created in the
heatapp! base menu.
21 - EN