Electrical Connections; Stability Of The Sewing Machine; Controlling The Sewing Speed; Attaching And Removing The Table Extension - Medion MD 17187 Bedienungsanleitung

Getting to know your machine
48 of 122

3.3. Electrical connections

 The power switch switches on the machine as well as the sewing light. In-
sert the plug of the supplied foot control in the connector housing (19) on
the machine and then the mains plug into the socket.
Use only the supplied foot control (model KD 2902).
After finishing working with the machine or before starting maintenance (e.g.
replacement of light bulb), always switch off and unplug the machine.

3.4. Stability of the sewing machine

You can use the adjustment foot to adjust the stability of the sewing machine.
 Turn the adjustment foot to the right to move it down or to the left to
move it up.
 Adjust the foot so that the sewing machine is level on the work surface and
does not wobble.

3.5. Controlling the sewing speed

The sewing speed is controlled by the foot control. The sewing speed can be
changed by applying more or less pressure to the foot control.

3.6. Attaching and removing the table extension

The machine is supplied with an attached work table. The interior of the table
extension is hollow and can be used to store the accessory bag.
 The table extension is removed by pushing it carefully to the left.
 To attach the table extension, carefully place the table extension on to the
machine and push it to the right until it audibly clicks into place.