Removing And Attaching The Presser Foot - Medion MD 17187 Bedienungsanleitung

Maintenance, care and cleaning
72 of 122

7.3. Removing and attaching the presser foot

 Removal: Turn the hand wheel (21) towards you until the needle (26) has
reached its top position.
 Raise the presser foot (28) by pushing up the presser foot lever (17).
 If you push up the presser foot release lever (31) behind the presser foot
holder (29), the presser foot (28) will drop out.
7.3.1. Attaching
 Attach the presser foot (28) so that the pin on the foot is directly under the
groove of the foot holder. Lower the presser foot lever (17).
 Now push the presser foot release lever (31) upwards. The presser foot (28)
automatically clicks into place.