Electrical Connections; Stability Of The Sewing Machine; Controlling The Sewing Speed; Attaching And Removing The Table Extension - Medion MD 11836 Bedienungsanleitung

Electrical connections

Stability of the sewing machine

Controlling the sewing speed

Attaching and removing the table extension

Accessories box

EN-8
The power switch turns both the machine and the sewing light on.
• Put the coupler plug of the supplied foot pedal into the connec-
tor housing on the machine and then put the mains plug into the
socket.
Only used the supplied foot pedal model KD 2902.
Once you have finished working or before you start maintenance,
always turn off and unplug the machine.
You can use the adjustment foot (17) to adjust the stability of the se-
wing machine.
• Turn the adjustment foot to the right to move it down or to the
left to move it up.
• Adjust the foot so that the sewing machine is level on the work
surface and does not wobble.
The sewing speed is controlled by the foot pedal. The sewing speed
can be changed by applying more or less pressure to the foot pedal.
The machine is supplied with an attached work table.
• The table extension is removed by pushing it carefully to the left.
• To attach the table extension, carefully place the table extension
on to the machine and push it to the right until it audibly clicks
into place.
The accessories box is integrated in the table extension.
• To open it, simply lift the lid of the table extension towards you,
giving you access to the accessories.