Ricatech RTT88 Bedienungsanleitung Seite 10

3. Message COPY will be displayed.
4. The target device icon "USB" or "CARD" start flashing, MP3 copying start, the process will stop as
copy finished.
5. Current MP3 will be playback from beginning
6. You can copy Mp3 from USB to SD card or SD card to USB at Stop Mode press REC/ERASE /
It may not to copy all MP3 depending on the MP3 file, USB device and SD card
From Phono to SD / USB
The system is capable of converting audio signal from PHONO input to MP3 format and store in USB
mass storage device or SD card (default USB if both devices are detected)
1. Slide the FUNCTION button to PHONO mode.
2. Press REC/ERASE /
create folder to store MP3 tracks.
3. Icon " REC " and message " TO" are displayed of about 15 seconds, icon " USB " start flashing.
4. The target device icon " USB " or " CARD " start flashing as REC begins.
5. Press STOP /
Delete MP3 tracks
The system support deleting previous recorded MP3 or existing files.
1. In USB or SD card playback mode, press and hold REC/ERASE /
playback track is stopped and will be deleted.
2. Message " delete " is displayed
Auxiliary Output
1 You can connect your radio to different sources using the auxiliary output.
2 Plug Auxiliary cables (not supplied) into the LINE OUT JACK.
3 Connect the other end of the Auxiliary cables into the input on your desired component.
4 See the owners' manual for the component for correction operation.
NOTE: The Auxiliary Output is a passive signal level output only and will not power speakers.
Auxiliary Input
1 You can connect external components to your unit by using the Auxiliary Input.
2 Plug Auxiliary cable into the LINE IN JACK on the back of your unit.
3 Set the FUNCTION SWITCH to LINE IN mode
4 Plug the other end of the Auxiliary cable into the output jack on your desired external componet
5 Check the volume level of your external component.
6 See operator's manual for correct operation of the external component.
to start ripping, the system will scan the contents of USB/SD card and
to exit PHONO Rec
for 2 seconds, current