Sony mdr-ds5000 Bedienungsanleitung Seite 23

Indicator light
DECODE MODE
DOLBY DIGITAL
DOLBY SURROUND
L C R
LS RS
VIRTUAL
Note
During Dolby Digital input, monaural sound sources which cannot be processed with the
surround effect are automatically identified and played back through two channels (left and
right), even when VIRTUAL SURROUND mode is selected. In this case, both the DOLBY
DIGITAL and DOLBY SURROUND indicators are turned off.
7
Adjust the volume.
To adjust the volume of headphones (sold separately) connected to the
PHONES jack
Turn PHONES—LEVEL to adjust the volume.
Output mode (surround effect)
VIRTUAL SURROUND
Virtual surround effect where the sound seems to be coming from
not only two front speakers (right and left), but also from one center
speaker, two rear speakers (right and left), and a subwoofer (when
DOLBY DIGITAL is lit).
The digital surround processor automatically identifies and
processes according to the format of the input audio signal.
When DOLBY DIGITAL indicator is on: Audio recorded in Dolby
Digital 5.1ch format is being processed.
When DOLBY SURROUND indicator is on: Audio recorded in Dolby
Surround (Pro Logic) format is being processed.
Raise the
volume
Lower the
volume
PHONES
Lower the
volume
LEVEL
Raise the
volume
MIN MAX
Operation
(Continued)
GB
23