Electrolux WTGL4E200 Benutzerhandbuch Seite 9

You cannot open the appliance door when the symbol is on.
You can open the door only when the symbol goes off.
If the programme is completed but the symbol stays on:
• There is water in the drum.
• The 'Rinse Hold' function is on.
Delay start
D • The programme time (washing and/or drying phase)
When the programme starts, the time decreases with steps of 1 minute.
• The delay start
When you press the delay start button, the display shows the delay start
time.
• Alarm codes
If the appliance has a malfunction, the display shows alarm codes. Refer
to 'Troubleshooting' chapter.
• Err
The display shows this message for some seconds if:
– You set a function that is not applicable for the programme.
– You change the programme while it operates.
The indicator of the Start/Pause button
•
When the programme is completed.
1) Only available for Spin/Drain programme
2) They come on when you set an automatic drying programme.
3) The symbols appear on the display when the related phase or function is set.
5.4 Start/Pause button
Press button to start or interrupt a
4
programme.
5.5 Delay start button
Press button to delay the start of a
5
programme from 30 minutes to 20 hours.
5.6 Time save button
Press the button 6
gramme duration.
• Press one time to set 'Shortened dura-
tion' for items with daily soil.
• Press two times to set 'Extra Quick' for
items with almost no soil.
Some programmes accept only
one of the two functions.
4
5
6
to decrease the pro-
flashes.
4
5.7 Drying time button
Press this button to set the time that suits
the fabrics you have to dry. The display
shows the set value.
Each time you press this button the time
value increases by 5 minutes.
You cannot set all time values for
different types of fabrics.
5.8 Drying level button 8
Press this button to set an automatic level
of dryness for the laundry. The display
shows the symbol of the set level.
• Extra dry
• Cupboard dry
• Iron dry
You can not set all automatic lev-
els for each type of fabrics.
ENGLISH 9
7