Electrolux WTGL4E200 Benutzerhandbuch Seite 17

Check the position of the flap
5. Measure out the detergent and the
fabric conditioner.
6. Carefully close the detergent dis-
penser. Make sure that the flap does
not cause a blockage when you
close the drawer.
9.3 Setting and starting a
programme
1. Turn the programme knob. The rela-
ted programme indicator comes on.
2.
The indicator of button
with red colour.
3. The display shows the default tem-
perature and spin speed. To change
1.
2.
3.
4.
4.
5.
4 flashes
Pull out the detergent dispenser until
it stops.
Press the lever down to remove the
dispenser.
To use powder detergent, turn the
flap up.
To use liquid detergent, turn the flap
down.
With the flap in the position
DOWN:
– Do not use gelatinous or thick
liquid detergents.
– Do not put more liquid deter-
gent than the limit showed in
the flap.
– Do not set the prewash phase.
– Do not set the delay start func-
tion.
the temperature and/or the spin
speed, press the related buttons.
Set the available functions. The indi-
cator of the set function comes on or
the display shows the related symbol.
Press button 4 to start the pro-
gramme. The indicator of button
is on.
ENGLISH 17
4