Electrolux WTGL4E200 Benutzerhandbuch Seite 18

18 www.electrolux.com
The drain pump can operate for a
short time when the appliance fills
water.
The appliance adjust automat-
ically the cycle time to the
laundry you have put in the
drum to have perfect washing
results in the minimum neces-
sary time. After approximately
15 minutes from the start of
the programme, the display
shows the new time value.
9.4 Interrupt a programme
1.
Press button
es.
2.
Press button
programme continues.
9.5 Cancel a programme
1.
Press button
gramme and to deactivate the appli-
ance.
2.
Press button
appliance. Now, you can set a new
washing programme.
The appliance does not drain the
water.
9.6 Change a function
You can change only some functions be-
fore they operate.
1.
Press button
es.
2. Change the function set.
9.7 Set the delay start
1.
Press button
the display shows the number of mi-
nutes or hours. The related symbols
comes on.
2.
Press button
the countdown of the delay start.
When the countdown is completed,
the programme starts automatically.
4 . The indicator flash-
4 again. The washing
1 to cancel the pro-
1 again to activate the
4 . The indicator flash-
5 again and again until
4 , the appliance starts
Before you press button
start the appliance, you can can-
cel or change the set of the delay
start.
You cannot set the delay start
with the Steam programme.
9.8 Cancel the delay start
1.
Press button 4
tor flashes.
2.
Press button 5
the display shows 0'.
3.
Press button
4
starts.
9.9 Open the door
While a programme or the delay start op-
erates, the appliance door is locked.
To open the appliance door:
1.
Press button 4
bol in the display goes off.
2. Open the appliance door.
3. Close the appliance door and press
button 4 . The programme or the
delay start continues.
If the temperature and level of the
water in the drum are too high,
the door lock symbol stays on and
you cannot open the door. To
open the door do the steps that
follow:
1. Deactivate the appliance.
2. Wait for some minutes.
3.
Make sure that no water is in
the drum.
If you deactivate the appliance, it
is necessary to set the pro-
gramme again.
9.10 At the end of the
programme
• The appliance stops automatically.
• The acoustic signals operate.
• In the display
comes on.
• The indicator of the Start/Pause button
4 goes off.
• The door lock symbol goes off.
to
4
. The related indica-
again and again until
. The programme
. The door lock sym-