Technical Data; Guarantee And Customer Service; Environment Friendly Disposal - Waves Robot stofzuiger RVC-104691 Bedienungsanleitung

Vacuum on but can't collect
the dirt or hair.
The unit is moving back‐ward
constantly.
The unit being stuck on the
edge of the rug.
The unit cannot pass through
the higher surface of the
floor.
TECHNICAL DATA:
Charging power: 19V 600mA
d.c. 14.4V 25W
GUARANTEE AND CUSTOMER SERVICE
Before delivery our devices are subjected to rigorous quality control. If, despite all care, damage
has occurred during production or transportation, please return the device to your dealer. In
addition to statutory legal rights, the purchaser has an option to claim under the terms of the
following guarantee:
For the purchased device we provide 2 years guarantee, commencing from the day of sale.
During this period we will remedy all defects free of charge, which can be demonstrably
attributed to material or manufacturing defects, by repair or exchange.
Defects which arise due to improper handling of the device and malfunctions due to
interventions and repairs by third parties or the fitting of non‐original parts are not covered by
this guarantee.
The rechargeable battery will wear out over time. This is normal and is not covered by the 2‐
year warranty. The same goes for all other parts.
ENVIRONMENT FRIENDLY DISPOSAL
You can help protect the environment!
Please remember to respect the local regulations: hand in the non‐working electrical
equipments to an appropriate waste disposal centre.
Emerio Holland B.V.
Kenaupark 9
2011 MP Haarlem
Nederland
Customer service:
T: +31 (0)23 5307900
E: info@emerioholland.nl
1. The dustbin is full. 2. The
filter is not installed correct.
1. Bumper is stuck. 2. The
anti‐cliff sensors are covered
with dirt. 3. The adjustable
windows are opened too
small.
The dust paper holder can't
pass the rug.
Removable back sensor switch
bounds the mobility.
1. Clean the dustbin. 2. Re‐
install the filter correctly.
1. Push the bumper and
release it. 2. Clean the lens
with Q‐tip. 3. Re‐adjust the
windows to suitable position.
Remove the dust paper
holder.
Remove the sensor switch.