mounted are free of obstacle. The distance to the left and to the right of the docking station
should be at least 100 cm and 30 cm In Fig. 2.
2. Take off the docking station from the mounting bracket then plug in the DC jack and store the
excess cord in the back of the docking station.
3. It is best to secure the docking station to the wall with the screws enclosed.
Proof Test
Please try either one of the following two methods to test the installation of docking station, if
the vacuum cannot go back to the docking station and charge successfully, then please replace
the docking station to the proper height.
1.Test by the unit, press down the selection button, do not release, and turn on the power
switch of the unit, when the unit begins to move, release the selection button. The unit will
switch the mode to return to the Docking Station for charging. Please refer Fig.3.
2.Test by the remote control, turn on the power switch of the unit, press the button "Docking"
on the remote control, the unit will go back to the docking station for charging. Please refer
Fig.4.