ALONG
THE
Operates unit in the along‐the‐wall mode continuously with 60 minutes
WALL
working time or until the battery low.
Z TYPE
Operates unit in the "Z" type mode continuously with 60 minutes working
time or until the battery low.
CONTROL PANEL OF DOCKING STATION
1.Set
2.Select
3."+"
4."‐"
5.Present time setting
6.Hour
7.Minute
8.Day of week
9.Battery indicator
10.Completed setting for time
cleaning
Functions of buttons
1. "Set": Press "Set" to switch between setting the present time and the working schedule.
A. Set present time:
Press "Set" once, "SET CLK" will flash.
Press "Select" to switch among time setting modes of Hour, Minute, and Week.
Press "+" and "‐" for adjustment of the digits.
B. Set working schedule:
Press "SET" twice, "
Press "Select" to switch among "Hour"/"Minute"/"Week" to do the setting. If there's no time
setting been done before, the screen will show "‐‐:‐‐", press "+" and "‐" to adjust the digits.
With "
" shown on the LCD display indicates the working schedule is completed.
2. "+": Press "+" for adjustment purpose.
3. "‐": Press "‐" for adjustment purpose.
Format of schedules:
a. Work everyday (Su‐Sa).
b. Five days a week (Mo‐Fr).
c. Six days a week (Mo‐Sa).
d. Two days a week (Su and Sa).
e. Once a week.
When the unit is successfully docked at the docking station, the battery indicator on LCD display
of the docking station will flash and the power indication lamp on the vacuum will flash too,
indicates the unit is in charging state.
INSTALLATION GUIDE
INSTALL THE DOCKING STATION
1. Tear off the adhesive tape from the back of the docking station mounting bracket in Fig. 1.
Affix the mounting bracket to the wall, and keep both sides of the wall which docking station
" on the left side of the screen will flash.