Herunterladen Inhalt Inhalt Diese Seite drucken

Warranty; Declaration Of Conformity - Protool VCP 260 E L Originalbetriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

12 Warranty

For our tools, we give warranty for material
and production defects in accordance with
the locally applicable legal provisions, but
in any case for at least 12 months. Within
the EU member states, the warranty period
is 24 months (verifi cation through invoice
or delivery note).
Damage caused by, in particular, natural
wear, overloading, incorrect handling, or
damage caused by the operator, or dam-
age caused through use of the equipment
contrary that specifi ed in the Operating In-
structions, or damage which was known
at the time of purchase, is not covered by
the warranty. Furthermore, damage caused
by the use of non-original PROTOOL ac-
cessories and consumable material is also
excluded.
Complaints can only be recognised if the
tool is returned while still assembled to the
supplier or an authorised PROTOOL Cus-
tomer Service workshop. Keep the Operat-
ing Instructions, Safety Instructions, Spare
Parts List and purchase receipt in a safe
place. Otherwise the respective, current
warranty condi tions of the manufacturer
shall apply.
Note
Due to continuous research and develop-
ment work, we reserve the right to make
changes to the technical content of this
documentation.
22
13 Declaration of
Conformity
Dust extractor
VCP 260 E-L AC
VCP 260 E-M AC
VCP 480 E-L AC
VCP 480 E-M AC
We declare under our sole responsibility
that this product is in conformity with the
following standards or standardization doc-
uments:
EN 62 233, EN 55 014-1, EN 55 014-2,
EN 60 335-1, EN 60 335-2-69, EN 61 000-3-2,
EN 61 000-3-3 according to the provision
of the regulations stipulated in Directive
2006/42/EC, 2004/108/EC.
All the procedures were applied as validly
amended at the time of the issue of this
declaration, without quoting these.
Technical documentation is kept at the manu-
facturer.
10
Stanislav Jakeš
Research and development
Protool GmbH
Wertstr. 20
D-73240 Wendlingen
31. 12. 2010
Serial no.
764275, 764507
764294
764276, 764509
764296

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis