Cleaning The Side Brushes - Miele Scout RX1 Gebrauchsanweisung

^ Use scissors to cut any threads or
hairs which have wound around the
roller brush. There is a groove on the
roller to guide you.
^ Remove the threads and hairs with
the comb end of the cleaning brush.
^ Replace the roller brush. Make sure
you position it carefully and that the
square guide is attached.
^ Lock the cover making sure it clicks
into position.
^ Replace the dust box in the robot
vacuum cleaner, making sure it clicks
into position.
In order to continue to achieve the
best possible cleaning results
replace the roller brush with a new
one after approx. two years.

Cleaning the side brushes

^ Place the robot vacuum cleaner
upside down on a level, clean
surface.
Do not lift the robot vacuum cleaner
by the area around the dust box as
it can come loose.
^ Lift off the side brushes using a flat
head screwdriver, for example.
^ Remove the threads and hairs with
the comb end of the cleaning brush.
^ Press the two side brushes firmly but
carefully onto the pins provided.
Ensure that they match up correctly
with the L and R markings.
In order to continue to achieve the
best possible cleaning results
replace the side brushes with new
ones after approx. one year.
en
47