Reducing The Maximum Crossing Over Height; Maintenance; Purchasing Accessories; Ordering The Correct Accessories - Miele Scout RX1 Gebrauchsanweisung

Reducing the maximum crossing
over height
The robot vacuum cleaner is set as
standard so that it can negotiate a
height of up to 20 mm.
This allows it to vacuum carpets, cross
over thresholds, etc.
If you would like to reduce this height
(down to approx. 6 mm) in order to
protect chair or table legs, or lamps for
example, you can deactivate the
factory default setting.
^ Press the Base button on the remote
control for at least three seconds.
LO will appear in the clock display.
Press the Base button again for at least
three seconds if you want to reactivate
the maximum crossing over height of
20 mm. HI will appear in the clock
display.

Maintenance

,
Before any maintenance work
switch the robot vacuum cleaner off
with the OFF switch on the side.
Only use genuine accessories with
the "Original Miele" logo on them.
This will ensure that the suction
power of the robot vacuum cleaner
is maintained, giving the best
possible cleaning results.

Purchasing accessories

Original Miele accessories can be
ordered from Miele, your Miele retailer
or online at:

Ordering the correct accessories

Original Miele accessories are
identified by the "Original Miele" logo on
the packaging.

Emptying the dust box

Empty the dust box of the robot
vacuum cleaner after each use.
^ Press the dust box release button
and remove the dust box.
^ Remove the lid from the dust box.
^ Empty the dust box.
The contents of the box can be
disposed of with the normal household
waste, providing it contains general
household dust only.
en
45