Kärcher A 2234 PT Originalbetriebsanleitung Seite 8

–
Organic solvents (such as petrol, paint thin-
ners, acetone, heating oil).
In addition, these substances may cause the ap-
pliance materials to corrode.
Description of the Appliance

These operating instructions describe the
basic models of the Multi-Purpose Vacs
shown on the front cover.

The illustrations show the maximum equip-
ment; depending on the model, there are dif-
ferences in equipment and supplied
accessories.
When unpacking the product, make sure that no
accessories are missing and that none of the
package contents have been damaged. If you
detect any transport damages please contact
your dealer.
Illustrations on Page 2
1 Carrying handle
2 ON/OFF switch for appliance
3 Blowing connection
4 Air regulation of the blowing function
5 Suction hose connection
6 Swivel casters
7 Accessory mount
8 Storage, power cord
9 Power cord with plug
10 Machine socket
11 Suction hose
12 Suction tubes 2 x 0.5 m
13 Floor nozzle, reversible
(A 2534 pt / A 2574 pt)
14 Floor nozzle with hard surface insert
(A 2234 pt)
15 Crevice nozzle
16 Filter bag
17 Hose Flex-Tool
18 Adapter
Attaching the Accessories
Illustration

Fold down the carrying handle.

Remove the motor casing and take acces-
sories out of the container.
8 English
8
English
Start up
Illustration

Fit the swivel casters on the container bot-
tom. Insert filter bag if required.

Put motor casing onto container and lock it.
Illustration

Connect accessories.
Operations
Always work with an inserted cartridge
filter - during wet as well as dry vacuum
cleaning!
Turning on the Appliance
Illustration

Plug in the main plug.

Switch on the appliance using the ON/OFF
switch.
Position I: Normal operations, suction or
blowing
Position II: Automatic operations with con-
nected electric tool
Position 0: Appliance and the connected
electric tool are switched off
Dry vacuum cleaning
Illustration
For a dust-free disposal of the vacuuming mate-
rial we recommend to insert the paper filter bag
as well. This provides the additional advantage
that the cartridge filter will not become contami-
nated that quickly.
Work only with a dry cartridge filter!

Therefore: Always let the cartridge filter dry
thoroughly before using it!
Added filter bags can burst!

Therefore: Change the filter bag at the ap-
propriate time!
Always use a filter bag while sucking in
fine dust!

The filling level of the filter bag depends on
the dirt that is sucked in.
The filter bag needs to be replaced more fre-
quently while sucking in fine dust, sand, etc.

Use a preliminary separator while sucking in
ash or rust particles (order no. 2.863-139).