Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Useful Adjustment Settings
Adjusting image positions and clock
manually (PC mode only)
Usually you can easily adjust the positions and clock of
images using Auto Setup. Use Manual Setup to opti-
mize the positions and clock of images when neces-
sary.
1
Press HOME MENU.
2
Press
/
to select "Option", and then press
ENTER.
3
Press
/
to select "Manual Setup", and then
press ENTER.
4
Press
/
to select the item to be adjusted, and
then press ENTER.
Manual Setup
H/V Position Adjust
Clock
Phase
Reset
5
Press
/
(and / ) to perform adjustment.
• Use
/
only when you adjust the vertical
position after selecting "H/V Position Adjust".
6
Press HOME MENU to exit the menu.
• To restore the factory defaults for all the items, press
/
to select "Reset" in step 4, and then press
ENTER. A confirmation screen appears. Press /
to select "Yes", and then press ENTER.
Selecting an input signal type
After connecting to the INPUT 1, INPUT 2, or INPUT 3
terminal, specify the type of video signals to be received
from the connected equipment. For the type of the
signals, see the operation manual that came with the
connected equipment.
Before starting the menu, press INPUT 1, INPUT 2,
or INPUT 3 on the remote control unit or press
INPUT on the Plasma Display to select an input
source.
1
Press HOME MENU.
2
Press
ENTER.
3
Press
ENTER.
4
Press
ENTER.
0
0
• For INPUT1, you can select Video or RGB.
• For INPUT2, you can select Video or S-Video.
• For INPUT3, you can select Video, S-Video, RGB,
or COMPONENT.
5
Press HOME MENU to exit the menu.
• If no image appears or images appear in inappropri-
ate colours, specify another video signal type.
• For the signal types to be specified, check the opera-
tion manual that came with the connected equip-
ment.
/
to select "Option", and then press
/
to select "Input Select", and then press
/
to select a signal type, and then press
Input Select
Video
S-Video
RGB
COMPONENT
12
65
En
Werbung
Kapitel
Inhaltsverzeichnis
