Using The Teletext Functions; What Is Teletext; Operating The Teletext Basics; Turning On And Off Teletext - Pioneer PDP-504HDE Bedienungsanleitung

Using the Teletext Functions

What is Teletext?

Teletext broadcasts pages of information and entertain-
ment to specially equipped television sets. Your Plasma
Display System receives Teletext signals broadcast by
TV networks, and decodes them into graphical format
for viewing. News, weather and sports information,
stock exchange prices and programme previews are
among many services available.
TELETEXT
TELETEXT

Operating the Teletext basics

Turning on and off Teletext

1
Select a TV channel or external input source
providing a Teletext programme.
2
Press m to display the Teletext (full screen).
3
Press m again to display the Teletext on the right
screen and normal image on the left screen.
• Each time you press m, the screen switches as
shown to the left.
• If you select a programme with no Teletext
signal, "Cannot display Teletext." appears.

Selecting and operating Teletext pages

Use the following remote control buttons to select and
operate Teletext pages.
Colour (RED/GREEN/YELLOW/BLUE):
You can select a group or block of pages displayed in
the coloured brackets at the bottom of the screen by
pressing the corresponding colour (RED/GREEN/
YELLOW/BLUE) on the remote control unit.
0 – 9:
Directly select any page from 100 to 899 by using 0 – 9.
w/x:
Selects the next or previous page.
v:
Each time you press v, the teletext image switches as
shown below.
Full
Upper half
Lower half
k:
To display hidden information such as an answer to a
quiz, press k.
• Press k again to hide the information.
u:
To stop updating Teletext pages, press u.
• Press u again to release the hold mode.
l
:
Displays an Index page for the CEEFAX/FLOF format.
Displays a TOP Over View page for the TOP format.
• Before displaying the Teletext, return the screen to
the single-screen mode.
09
45
En