EINHELL TC-HP 1538 PC Bedienungsanleitung Seite 6

General safety regulations
and accident prevention
It is essential that you read the
safety regulations and operating
instructions in their entirety and
follow the information contai-
ned therein in order to eliminate
the possibility of an accident or
potentially dangerous situation
from occurring while working
with the high-pressure cleaner.
The electrical connection
•
must be installed by an elec-
trician in accordance with IEC
60364.
The power plug must be
•
plugged into a properly in-
stalled and earthed socket
outlet with connected earth-
leakage circuit breaker (30
mA).
Always check the device, the
•
mains cable and the plug be-
fore using the high-pressure
cleaner. Only operate the
device when it is in good wor-
king order and has not been
damaged in any way. Dama-
ged parts must be immedi-
ately replaced by a qualified
electrician.
Always pull the power plug
•
out of the socket outlet be-
fore doing any work on the
high-pressure cleaner, before
changing the nozzle and whe-
SiHi_TC_HP_1334_SPK7.indb 6 SiHi_TC_HP_1334_SPK7.indb 6
GB
never the cleaner is not being
used.
Only use suitable extension
•
cables when working out-
doors. Extension cables must
have a minimum cross-sec-
tion of 1.5 mm
nections must have earthing
contacts and be rainwater-
protected. Cables over 10 m
in length must have a cross
section of at least 2.5 mm
Warning! This device was
•
developed to be used with
cleaning agents supplied or
recommended by the manu-
facturer. The use of any other
cleaning agents or chemicals
can negatively affect the safe-
ty of the device.
Warning! Do not use the de-
•
vice when other persons or
animals are in the near vicini-
ty unless they are wearing ap-
propriate protective clothing.
Warning! High-pressure jets
•
can be dangerous when the
cleaner is not used properly.
Do not direct the jet toward
persons, animals, live electri-
cal equipment or the device
itself.
Do not direct the jet toward
•
yourself or others in order to
clean clothes and footwear.
Do not allow the high-pres-
•
- 6 -
. The plug con-
2
.
2
10.10.14 07:48 10.10.14 07:48