Connection Cable - Electrolux HC411520 Benutzerinformation

32 www.aeg.com
Make sure that you connect
the blue neutral cable to the
terminal with a letter "N" on
it. Connect the brown (or
black) phase cable to the
terminal which has a letter
"L". Keep the phase cable
connected at all times.

8.6 Connection cable

To replace the connection cable use only
the special cable or its equivalent. The
cable type is: H05V2V2-FT90.
8.7 Assembly
ON-TOP INSTALLATION
R 5mm
490
min.
55mm
min.
650mm
min.
450mm
+1 mm
340 +1 mm
Make sure that the cable section is
applicable to the voltage and the
working temperature. The yellow / green
earth wire must be approximately 2 cm
longer than the brown (or black) phase
wire.