Possibilities For Insertion; Technical Information - Electrolux HC411520 Benutzerinformation

34 www.aeg.com
9. Tighten the fixing plates / retaining
grip screws.
10. Use silicone to seal the gaps
between the hobs and between the
hobs and the worktop.
11. Put some soapy water on the
silicone.
12. Press the rubber shape with some
strength against the glass ceramic
and move it slowly along the space.
13. Do not touch the silicone until it
becomes hard, it can last about a
day.
14. Carefully remove the silicone that
came out with a shaving blade.
15. Clean the glass surface.

9. TECHNICAL INFORMATION

9.1 Hob dimensions
Width
Depth
9.2 Bypass diameters
BURNER
Dual
9.3 Gas burners power and
injectors
Gas burners power
Burner
Dual burner
Natural Gas Liquid Gas
5,0 kW 4,6 kW / 329
g/h

8.9 Possibilities for insertion

The panel installed below the hob must
be easy to remove and let an easy access
in case a technical assistance
intervention is necessary.
Kitchen unit with door
60 mm
A) Removable panel
B) Space for connections
Kitchen unit with oven
The electrical connection of the hob and
the oven must be installed separately for
safety reasons and to let easy remove
oven from the unit.
360 mm
520 mm
Ø BYPASS 1/100 mm
65
30 mm
min 20 mm
A
(max 150 mm)
B