Charging the batteries
Before the handset is used for the first time, insert it in the base station/
charging station for at least 16 hours.
When the handset is inserted in the base/charging station properly, you will hear
a confirmation signal. The handset warms up during the charging process. This
is normal and does not represent a risk. Do not charge the handset with charging
units from other manufacturers. The current battery charge status is indicated
in the display:
Full
Connecting the base station
Caution: Position the base station with a minimum distance of 1 m to
other electronic devices, otherwise there is a risk of mutual disturbance.
Connect the base station as illustrated in the diagram. For reasons of safety, only
use the power adapter plug and telephone connection line supplied.
Only connect the base station and PC after you have installed the VoIP
driver.
Mains power outlet
PC USB port
Telephone line socket
Putting the Telephone into Operation
51
Half empty
Low
Empty
139