HBM u5 Montageanleitung Seite 14

14
Attaching the knuckle eye:
• Screw the correct adapter (dependent on nominal force!; see Chapter 1) to
U5 (taking screw length into account)
• Turn the lock nut back as far as the eye
• Screw the knuckle eye into the adapter as far as the stop
• Unscrew knuckle eye 1 to 2 turns and align
• Load eye with nominal load
• Tighten lock nut (M
CAUTION
When locking with the lock nut, under no circumstances let the
torque be transmitted through the transducer.
HBM
, lock using the flat of the adapter)
B
U5
A0809-8.0 en/de/fr