Installation With Tensile Force Adapter And Knuckle Eye - HBM u5 Montageanleitung

U5

5.3.2 Installation with tensile force adapter and knuckle eye

If the transducer is to be tensile force loaded, it can be mounted with an
adapter (HBM accessory) and a knuckle eye. A centering hole is located on
both sides of the transducer.
When knuckle eyes are used, the breaking force is reduced to 150 %.
Knuckle eyes are only suitable for use with quasi‐static loading (alternating
loads v10 Hz).
Installation with flange through‐hole
M
A
Installation with knuckle eyes
Fig. 5.2 Installation for tensile loading
Nominal force H1 (mm)
(kN)
100 app.159
200 app. 203
500 app. 319
1)
secured with 2 screws to prevent torsion
A0809-8.0 en/de/fr
provided by customer
Tensile force adapter
lock nut (M )
B
Knuckle eye ZGUW
Bearing plate
H2 (mm) Starting torque M
app. 269
app. 351
app. 575
Installation with flange thread
M
A
provided by customer
lock nut (M )
B
Tensile force adapter
M
A
M
A
lock nut (M )
B
Knuckle eye ZGUW
Starting torque M
A
(NVm)
115
280
560
13
Tensile force adapter
lock nut (M )
B
Knuckle eye ZGUW
T
B
(NVm) (mm)
1900 app. 15
4300 app. 19
1)
- app. 23
HBM