Teach-In - eQ-3 BC-RT-TRX-CyG-2 Bedienungsanleitung

In order to enable to use the MAX! Radiator Thermostat + in
\RXU LQVWDOODWLRQ WKH GHYLFH KDV WKH EH WDXJKWLQ ¿UVW 7KH
teach-in procedure depends on the system variant (House
Solution, Room Solution, Radiator Solution) used. Choo-
se your system variant and follow the instructions below:
If the MAX! Radiator Thermostat + has already been
FRQ¿JXUHG ZLWK D 0$; :DOO 7KHUPRVWDW + , a factory
reset must be performed prior to teaching-in for the
¿UVW WLPH WR D 0$; &XEH VHH VHFWLRQ  
MAX! House Solution
In the House Solution all settings and program-
mings (e.g. week programmes) can be made via
the MAX! software.
‡ First activate the teach-in mode of the MAX! Cube. Please
start the local MAX! software and click on „New device".
‡ Now activate teach-in mode on the radiator thermostat.
Press and hold down the Boost button for at least 3 se-
conds. The antenna symbol (
the teach-in time remaining in seconds. The teach-in
time is 30 seconds.
‡ If teach-in has been successful, the display returns to
normal display.
As soon as the MAX! Radiator Thermostat + has
been taught in to the MAX! Cube, all data such as
date, time or week programme are transmitted to it
via radio connection.
The MAX! Radiator Thermostat + can only be taught-
in on one MAX! Cube.

9. Teach-in

) is displayed, along with
61