Functional Description; Button Operation - Vestamatic Dz-Plus R 500 Bedienungsanleitung

83200211 H1.qxd 27.06.01
Each control can be operated with the internal "down" (q) and the "up"
(Q) buttons. When more Vestamatic DZ-Plus R 500 roller shutter
controls are in use, it is also possible to use the external central button.
Except push buttons with latched position, any push button product
and design may be used.
A Vestamatic, , , switching timer, e.g. Rolltec Plus 500 potential-free 3 sec-
onds, can be used instead of a central button.
You can connect any number of Vestamatic DZ-Plus R 500 roller
shutter controls to a central button or a Vestamatic switching timer.
14:22 Seite 17

Functional description

- 17 -
G

Button operation

By shortly tapping the up or down button, the drive will move into the
desired direction.
Tap the opposite button in order to stop the drive before it reaches the
end position.
Manual/Automatic Switch
In position (H) (manual), the Vestamatic DZ-Plus R 500 roller shutter
control can only executed one up or down command.
In position (A) (automatic) commands from the Vestamatic DZ-Plus
R 500 roller shutter control and commands from the central button can
be executed simultaneously.
As long as an up or down command from the central button is pend-
ing, no single command can be executed from Vestamatic DZ-Plus
R 500 roller shutter control.
The duration of the up or down command of the Vestamatic DZ-Plus
R 500 roller shutter control was preset to 120 seconds by the manu-
facturer.
- 18 -
G