Fitting Disc Foot; Fitting Monitor Arm - Konig + Neurath INSIDE.25 Montageanleitung

8. Fitting disc foot

(a) Unscrew glide.
(b) Fix disc foot to the bottom
of the screen using counter-
sunk hex screws (SW 4).
(c) Use the washers supplied
to fit horizontally.
Caution:
Disc feet can only be used with
elements of height up to 3
filing levels, or in L, T, X or Y
configurations!
Accessories must not be used
with free-standing screens that
have disc feet!

9. Fitting monitor arm

Clip the slot nuts into the
organiser rail profile. Fix the
monitor arm adapter plate to
the slot nuts (SW 4).
Please note maximum load
specification on page 27.
(a)
(b)
(c)
24