Technische Daten - ALLEN & HEATH Qu-24 Handbuch

12. Technische Daten

Inputs
XLR Mic/Line Inputs 1-16
Mic/Line Preamp
Input Sensitivity
Analogue Gain
Maximum Input Level
Input Impedance
TRS jack Line inputs 1-16
Input Sensitivity
Analogue Gain
Maximum Input Level
Input Impedance
Stereo ST1, ST2 Line Inputs
Mono capability
Input Sensitivity
Trim
Maximum Input Level
Input Impedance
Stereo ST3 Line Input
Input Sensitivity
Trim
Maximum Input Level
Input Impedance
Mic/Line Channel noise
Mic EIN
Unity gain 0dB
Mid gain +30dB
Mic/Line Channel THD+N
Unity gain 0dB
Low gain +10dB
Mid gain +30dB
Talkback Mic Input
Input Sensitivity
Maximum Input Level
Input Impedance
System
Measured balanced XLR in to XLR out, 0dB gain, 0dBu input
Dynamic Range 112 dB
System Signal to Noise 90 dB (@+4dBu, 22Hz - 22kHz)
Frequency Response +0/-0.5dB 20Hz to 20kHz
Headroom +18dB
Internal operating Level 0dBu
dBFS Alignment +18dBu = 0dBFS (+22dBu at XLR output)
Meter Calibration 0dB meter = -18dBFS (+4dBu at XLR out)
Meter Peak indication -3dBFS (+19dBu at XLR out), multi sensing
Meter Signal indication -48dBFS (-26dBu at XLR out)
Main meter Type 12 LED, Fast (peak) response
Strip meter Type 3 LED, Fast (peak) response
Sampling Rate 48kHz +/-100PPM
ADC 24-bit Delta-Sigma
DAC 24-bit Delta-Sigma
Latency 1.2 ms (local XLR in to XLR out)
0.7 ms (local XLR in to AES out)
Operating Temperature Range 0 deg C to 35 deg C (32 deg F to 95 deg F)
Qu-16/24 Bedienungsanleitung
Balanced, 48V phantom power
Fully recallable
-60 to +5dBu
-5 to +60dB, 1dB steps
+19dBu
>5kΩ
Balanced
-50 to +20dBu
-10 to +60dB, 1dB steps
+29dBu
>10kΩ
Balanced, 1/4" TRS jack
L normals through R for Mono input
Nominal +4dBu
+/-24dB
+22dBu
>7kΩ
Unbalanced, 3.5mm Mini Jack
Nominal 0dBu
+/-24dB
+18dBu
>7kΩ
20-20kHz, Direct Out
-126 dB with 150Ω source
-92 dBu
-85 dBu
20-20kHz, Direct Out @0dBu 1kHz
0.0005 % -89 dBu
0.001% -83dBu
0.001% -83dBu
Balanced, 48V phantom power
-55 to +6dBu
+10dBu
>5kΩ
Outputs
Mix1-10 and LR Outputs
Output Impedance
Nominal Output
Maximum Output Level
Residual Output Noise
Stereo Alt Output
Source
Output Impedance
Nominal Output
Maximum Output Level
Residual Output Noise
Stereo 2Trk Output
Source
Output Impedance
Nominal Output
Maximum Output Level
Residual Output Noise
AES Digital Output
Sampling rate
Output
USB Audio
Qu-Drive Stereo
Device
Stereo Record
Stereo Playback
Qu-Drive Multitrack
Device
Multitrack Record
Multitrack Playback
USB B Streaming
Send (upstream)
Return (downstream)
Mains Power
Qu-16
Fuse rating
Dimensions and Weights
Qu-16 Mixer
Desk mounted
Rack mounted
Packed in shipping box
Packed weight
Unpacked weight
55
Balanced, XLR
<75Ω
+4dBu = 0dB meter reading
+22dBu
-90 dBu (muted, 20-20kHz)
Balanced, 1/4" TRS jack
Patchable
<75Ω
+4dBu = 0dB meter reading
+22dBu
-92 dBu (mid level, source muted, 20-20kHz)
Balanced, 1/4" TRS jack
LR post-fade
<75Ω
+4dBu = 0dB meter reading
+22dBu
-90 dBu (muted, 20-20kHz)
2 channel, XLR
48kHz
2.5Vpp balanced terminated 110Ω
Q-Drive
USB hard drive required for recording
2 channel, WAV, 48kHz, 24-bit, patchable
2 channel, WAV, 44.1/48kHz, 16/24-bit, to ST3
Q-Drive
USB hard drive only
18 channel, WAV, 48kHz, 24-bit
CH1-16 + patchable stereo pair
18 channel, WAV, 48kHz, 24-bit
CH1-16, ST1
USB 2.0 MAC compliant only
24 channel, WAV, 48kHz, 24-bit
22 channel, WAV, 48kHz, 24-bit
100-240V AC, 50/60Hz, 82W max
T1.6 AL 20mm
Width x Depth x Height
440 x 500 x 186 mm (17.4" x 19.7" x 7.4")
483 x 486 x 190 mm (19" x 19.1" x 7.5"), 11U
610 x 680 x 380 mm (24" x 27" x 15")
13.5 kg (30 lbs)
10 kg (22 lbs)
AP9372-1