Inserting The Batteries - Sharp XV-Z12000 Anleitung

XV-Z12000
ing the Remote Control
Available Range of the Remote Control
The remote control can be used to control the projector
within the ranges shown in the illustration.
Note
• The signal from the remote control can be reflected off a screen
for easy operation. However, the effective distance of the signal
may differ due to the screen material.
When using the remote control:
• Be sure not to drop, expose to moisture or high temperature.
• The remote control may malfunction under a fluorescent lamp.
Under that circumstance, move the projector away from the fluo-
rescent lamp.

Inserting the Batteries

The batteries (used is two "AA" size.)
Incorrect use of the batteries may cause them to leak or explode. Please follow the precautions below .
Caution
• Insert the batteries making sure the polarities correctly match the
ment.
• Batteries of different types have different properties, therefore do not mix batteries of different types.
• Do not mix new and old batteries.
This may shorten the life of new batteries or may cause old batteries to leak.
• Remove the batteries from the remote control once they have run out, as leaving them can cause them to leak.
Battery fluid from leaked batteries is harmful to your skin, therefore be sure to first wipe them and then remove
them using a cloth.
and
12
Remote control
23'(7 m)
30˚
30˚
45˚
45˚
30˚
Remote control
marks inside the battery compart-