Listening To Your System; Auto Listening Mode; Listening In Surround Sound; Listening In Stereo - Pioneer XV-DV535W Bedienungsanleitung

Listening to your system

Chapter 2
Listening to your system

Auto listening mode

The Auto listening mode is the simplest way to
listen to any source as it was mastered: the
output from the speakers mirrors the channels
in the source material.
CLEAR
SHIFT
• Press SHIFT+SURROUND to select the
AUTO listening mode.

Listening in surround sound

You can listen to stereo or multichannel
sources in surround sound.
is generated from stereo sources using one of
the Dolby Pro Logic decoding modes.
CLEAR
SHIFT
• Press SHIFT+SURROUND repeatedly to
select a listening mode.
The choices that appear in the display will vary
according to the type of source that's playing.
• AUTO – Auto listening mode (see above)
• DOLBY DIGITAL/DTS – Dolby Digital or
DTS decoding (depending on the source).
For a multichannel source, this will be the
same as AUTO.
• PROLOGIC – 4.1 channel surround sound
for use with any two-channel source
Note
1 If the source is Dolby Digital or DTS, the front panel 2 D or DTS indicator lights.
2 • Note that the input source must be switched to DVD/CD for multichannel playback.
• The wireless speaker system must be switched on for multichannel surround sound.
• If you're planning on recording a multichannel source, refer to Recording mode on page 27.
3 When listening in DOLBY DIGITAL/DTS mode, two-channel material will automatically be played in surround sound using
Dolby Pro Logic II decoding.
SLEEP DISPLAY
SURROUND FRONT
SURROUND
1
2
Surround sound
SLEEP DISPLAY
SURROUND FRONT
SURROUND
1
• MOVIE – Pro Logic II 5.1 channel surround
sound, especially suited to movie sources
(use with any two-channel source)
• MUSIC – Pro Logic II 5.1 channel surround
sound, especially suited to music sources,
for use with any two-channel source
• STEREO – See Listening in stereo below

Listening in stereo

You can listen to any source—stereo or
multichannel—in stereo. When playing a
multichannel source, all channels are
downmixed to the front left/right speakers and
the subwoofer.
• Press SHIFT+SURROUND repeatedly until
STEREO shows in the display.

Listening with headphones

When headphones are connected, only the
STEREO mode is available.
3
CLEAR SLEEP DISPLAY
SHIFT SURROUND FRONT
SURROUND
02
13
En