Error Messages; Resetting The System; Using The Language Code List - Pioneer XV-DV535W Bedienungsanleitung

Additional information
Problem
Horizontal stripe noise
interference on a TV
near the transmitter.

Error Messages

Message
REC MODE
SND DEMO
CANNOT
STEREO
TRAY LOCK
MUTING
EEP ERR
EXIT

Resetting the system

Use this procedure to reset all system settings
to the factory default.
1 Switch the system on.
2 Press STANDBY/ON while holding
down the front panel FM/AM button.
The next time you switch on, all the system
settings should be reset.

Using the language code list

Some of the language options (see Language
settings on page 23) allow you to set your
preferred language from any of the 136
languages listed in the Language code list on
page 44.
1 Select 'Other Language'.
2 Use (cursor left/right) to select
either a code letter or a code number.
Remedy
If there a piece of A/V equipment with an antenna near the transmitter, move
the transmitter away from the antenna input terminal of the AV equipment.
Description
• An operation is prohibited because the Recording Mode is on (page 27).
• The sound demo is on. See General in Troubleshooting on page 40.
• An operation is prohibited because headphones are connected, or TEST
TONE is pressed during disc playback.
• An operation is prohibited because the DVD/CD function isn't selected.
• The tray lock is on. Contact your Pioneer authorized dealer for instructions.
• An operation is prohibited because the sound is muted (press MUTE).
• Contact your Pioneer authorized service center or your dealer for servicing.
• Appears when a menu is automatically exited after a set period of inactivity.
3 Use (cursor up/down) to select a
code letter or a code number.
See the Language code list (next page) for a
complete list of languages and codes.
09
43
En