JVC KD-LHX601 Bedienungsanleitung Seite 17

1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see pages 53 and 54.)
2
Press number button 4 to select
"TUNER"—Tuner category of the
PSM settings.
The "PTY Stnby" (standby) setting screen
appears on the display.
3
Select "AF-Regn'l" (alternative
frequency/regionalization
reception).
4
Select the desired mode—"AF,"
"AF Reg," or "Off."
5
Finish the setting.
Using Traffic News Standby Reception
Traffic News Standby Reception allows the unit
to switch temporarily to Traffic Announcement
(TA) from the current source (another FM station,
DAB, CD, or other connected components).
• Traffic News Standby Reception will not work if you
are listening to an AM station.
Press TP/PTY to activate Traffic
News Standby Reception.
Each time your press the button,
this function is turned on and off
alternately.
TP indicator appears.
(either lights up or flashes)
7 When the current source is FM or DAB, the
TP indicator either lights up or flashes.
• If the TP indicator lights up, Traffic News
Standby Reception is activated.
If a station (or service) starts broadcasting a
traffic announcement, "Traffic News" appears
on the display, and this unit automatically
tunes in to the station (or service). The
volume changes to the preset TA volume
level (see page 21) and the traffic
announcement can be heard.
• If the TP indicator flashes, Traffic News
Standby Reception is not yet activated since
the station (or service) being received does
not provide the signals used for Traffic News
Standby Reception.
To activate Traffic News Standby Reception,
you need to tune in to another station
providing these signals. Press ¢
4
to search for such a station.
When a station (or service) providing these
signals is tuned in, the TP indicator stops
flashing and remains lit. Now Traffic News
Standby Reception is activated.
CONTINUED ON THE NEXT PAGE
or
17