Sound Adjustments; Adjusting The Sound - JVC KD-LH1101 Bedienungsanleitung

Adjusting the sound

You can adjust the sound characteristics to your
preference.
• "Vol Adj" setting is required for each source
except FM. Before starting "Vol Adj," select an
appropriate source for which you want to make
an adjustment.
1
Select the item you want to adjust.
The next-step-operation
buttons start flashing.
Each time you press SEL
(select), the adjustable items
change as follows:
iEQ
Canceled
• For iEQ (sound mode) settings, see pages
28 and 29.
• For METER (level meter) settings, see
page 30.
Indication To do:
Fad* Adjust the front
and rear speaker
balance.
Bal Adjust the left
and right speaker
balance.
Vol Adj Adjust and store
the input level
of each source.
* If you are using a two-speaker system, set the fader
level to "00."

SOUND ADJUSTMENTS

Fad/Bal Vol Adj
METER
Range
R06 (Rear only)
|
F06 (Front only)
L06 (Left only)
|
R06 (Right only)
–12 (min.)
|
+12 (max.)
2
Make adjustments.
• To adjust fader and balance—Fad, Bal:
You can make these two adjustments at
the same time, by referring to the
indication on the display.
• Press 5 (up) or ∞ (down)
• Press ¢
• To adjust the input level of each source
—Vol Adj:
This setting is required for each source
except FM. Before making an adjustment,
select an appropriate source for which you
want to make an adjustment.
Once you have adjusted it, it is
memorized, and you will not need to
adjust the volume level each time you
change the source.
Adjust the input level to match the FM
sound level.
• You cannot make an adjustment if the
source is FM. "FIX" will appear.
to adjust the fader.
or 4
to adjust the balance.
To increase the level
To decrease the level
27