Safety; Intended Use; Personnel Qualification - WIKA 7 Betriebsanleitung

2. Safety

2. Safety
WARNING!
Before installation, commissioning and operation, ensure that the
appropriate instrument has been selected in terms of measuring
range, design and specific measuring conditions.
Check the compatibility with the medium of the materials subjected
to pressure!
In order to guarantee the measurement accuracy and long-term
stability specified, the corresponding load limits must be observed.
Non-observance can result in serious injury and/or damage to the
equipment.
Further important safety instructions can be found in the individual
chapters of these operating instructions.

2.1 Intended use

These instruments are used for measuring pressure in hazardous areas of indus-
trial applications.
The instrument has been designed and built solely for the intended use described
here, and may only be used accordingly.
The manufacturer shall not be liable for claims of any type based on operation
contrary to the intended use.

2.2 Personnel qualification

WARNING!
Risk of injury should qualification be insufficient!
Improper handling can result in considerable injury and damage to
equipment.
The activities described in these operating instructions may only
be carried out by skilled personnel who have the qualifications
described below.
WIKA operating instructions pressure gauge model 7 per ATEX
EN
5