Connecting The Comfortel M-100 Charging Cradle (Optional) And Charging The Battery - Auerswald COMfortel M-100 Kurzanleitung

Connecting the COMfortel M-100 Charging
Cradle (optional) and Charging the Battery
Requirements
– COMfortel M-100 Charger (optional)
– Wall wart with type no. FW7600/06
– power socket
Warning: Inappropriate use or incorrect replacement of
the wall wart can result in a life-threatening electric
shock, or can damage or destroy the device.
Only use the wall wart supplied with the equipment.
Note: The handset is supplied with inserted batteries. Charge
your handset batteries for 4 hours before you use the handset for
the first time.
Note: Remove the inner liner of the COMfortel M-100 Charging
cradle if the handset is equipped with the COMfortel M-100 Soft-
cover (optional).
Insert the wall wart into the port at the backside of the charg-
1.
ing cradle.
Insert the wall wart plug into a power socket.
2.
Place the handset in the charging cradle.
3.
The handset switches on.
At factory state: The menu for registration at the IP-
DECT server opens (Auto Subscription).
The battery starts charging. The
while the battery is charging.
COMfortel M-100 - Setup and Quick Guide V04 10/2015
Commissioning
icon is displayed
37