Technical Specifications; Connector Configuration - Omnitronic UHF-502 Bedienungsanleitung

7

TECHNICAL SPECIFICATIONS

System:
Carrier frequency:
Receiving frequencies:
Coverage:
RF power output:
Modulation method:
Frequency stability:
Frequency response:
Sensitivity:
S/N ratio:
Selectivity:
T.H.D.:
Audio outputs:
Mic:
Mix:
Power supply:
Receiver:
Power consumption:
Microphones:
Dimensions, weight:
Receiver:
Microphones:
Specifications are subject to change without notice due to product improvements

Connector Configuration

UHF-502
Non-diversity, 2 channels
823-832 MHz / 863-685 MHz
100 / 80
50 m (with line-of-sight)
10 mW
FM
10 ppm
40 Hz - 18 kHz
-95 dB
>80 dB
>80 dB
<0.1 %
2 x XLR, bal.
6.3 mm jack, unbal.
12 V DC via supplied power unit (100-240 V AC, 50/60 Hz)
5 W
2 x 1.5 V battery, type AA
253 x 482 x 51 mm (LxWxH), 1.9 kg
50 x 240 mm (DxL), 230 g (w/o batteries)
21