Herunterladen Diese Seite drucken

jedo Vedi Bedienungsanleitung Seite 31

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Proceed as follows to attach the napkin bag:
The napkin bag can be attached to the push rod using the two snaps.
Proceed as follows to adjust the handle height:
1.) Compress the two snaps provided on either side of the handle – see Figure
8.
2.) The height of the push rod can now be easily adjusted.
Proceed as follows to convert your stroller to a pushchair:
1.) Remove the soft carrying bag and seat extension.
2.) Now, adjust the backrest to the desired position.
Proceed as follows to adjust the backrest:
1.) There is a strap on the back side of the backrest – see Figure 21.
2.) Pull this strap upwards to release the latching.
3.) The desired position can now be adjusted.
4.) The backrest will be latched when you hear it click into place.
Proceed as follows to adjust the footrest:
1.) Stand in front of the stroller.
2.) Actuate the red sliding button on the left and right on the footrest.
3.) The footrest can now be adjusted.
Proceed as follows to convert the soft carrying bag to a foot muff:
1.) Remove the plate from the rear side of the bag.
2.) Now, thread the belts through the slots provided for this purpose in the bag.
3.) Undo the carrying handles of the bag with the snap hooks.
Proceed as follows to lock the front wheels:
1.) Turn the little lever provided on the back side of each front wheel
anticlockwise – see Figure 22.
2.) The lever will automatically lock in place in the lowermost position.
3.) The wheels are thus locked.
4.) To release the wheels, pull the pin upwards and turn it clockwise until it
partly latches only.
31

Werbung

loading

Verwandte Produkte für jedo Vedi

Diese Anleitung auch für:

Sato