jedo Vedi Bedienungsanleitung Seite 25

Proceed as follows to adjust the backrest inside the carrying shell:
1.) The Vedi stroller comes with a separate backrest inside the carrying shell.
2.) To adjust this separate backrest, reach behind the backrest and pull it
upwards.
3.) Fix the desired position using the ribs on the bottom of the shell.
Proceed as follows to use the carrying handles:
1.) On the sides of the carrying shell, there are bags that can be opened by
means of a zipper.
2.) Remove the carrying handles from these bags – for comfortable carrying of
the shell.
Proceed as follows to convert your stroller to a pushchair
1.) Remove the carrying shell from the frame – see Figure 6.
2.) Now attach the bucket seat to the frame.
3) On the frame, there are two inlets each on the left and on the right to fasten
the bucket seat. See the section Proceed as follows to place the carrying
shell onto the frame.
3.) On the bucket seat, there are two bolts each on the left and right to insert
the inlets on the frame.
4.) Now, insert the two bolts on the left and right into the fastening inlets on the
frame.
5.) All four bolts will be properly inserted when you hear them click into place.
25