Herunterladen Diese Seite drucken

jedo Vedi Bedienungsanleitung Seite 27

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Proceed as follows to detach the hood:
1.) There is a little lug on the left and right on the bottom end of the plastic plug
of the hood and the bucket seat – see Figure 20.
2.) Press these lugs to detach the hood.
Proceed as follows to adjust the footrest:
1.) Stand in front of the stroller.
2.) Actuate the red sliding button on the left and right on the footrest.
3.) The footrest can now be adjusted.
Proceed as follows to attach the foot muff:
1.) Use the two snap hooks to attach the foot muff to the eyelets to which the
lap belt is attached.
Proceed as follows to adjust the backrest:
1.) On the reverse side of the backrest, there is a black strap – see Figure 21.
2.) Pull this strap upwards to release the latching.
3.) You can now adjust the desired position.
Proceed as follows to lock the front wheels:
1.) Turn the little lever on the back side of each front wheel anticlockwise – see
Figure 22.
2.) The lever will automatically lock in place in the lowermost position.
3.) The wheels are thus locked.
4.) To release the wheels, pull the pin upwards and turn it clockwise until it
partly latches only.
Proceed as follows to assemble the frame:
1.) Remove the carrying shell or bucket seat respectively from the frame.
2.) Stand in front of the stroller such that the push rod in front of you is near the
large wheels.
3.) Lock the brake.
4.) Pull the left and right bottom levers towards you at the same time – see
Figure 23.
5.) The frame will start folding up.
6.) Keep the levers pulled and additionally slightly press on the black foot lever
on the right-hand side of the frame with your foot – see Figure 24.
7.) The frame will now fold up completely.
27

Werbung

loading

Verwandte Produkte für jedo Vedi

Diese Anleitung auch für:

Sato