M) Metronome - Classic Cantabile DP 210 Bedienungsanleitung

m) Metronome

With the metronome switched on, a metronome sound is made. The time of the metronome
and the speed can be set.
Proceed as follows:
• Keep the key „FUNCTION" pushed and then briefly push a piano key in the „METRONO-
ME" area.
„ON/OFF" = switching metronome on or off
„2".... „6" = selecting time type
• Set the metronome speed by pushing the piano keys „0" to „9" in the „TEMPO" area (the
key „FUNCTION" must stay pushed).
Always enter the times per minute with three digits.
Example: For 85 times per minute push the keys „0", „8" and „5" in
quick succession.
Alternatively, you can set the speed with the keys „+" and „-" in the
area from 30...280 times per minute (keep the respective key pushed for
longer).
If you push the keys „+" and „-" at the same time, the tempo of the
metronome is reset to the basic setting (120 times per minute).
Use the piano key „TAP" in the „METRONOME" area to manually spe-
cify a time. Push this key twice in sequence for the digital piano to take
over the time between the two taps as the time setting.
• Release the key „FUNCTION" again when the setting is completed.
If the sound of the metronome is not audible, switch if on as described above (keep the „FUNCTION" key pushed and briefly push
the piano key „ON/OFF" in the area „METRONOME"; then release the key „FUNCTION" again).
TEMPO
TAP 0 1 2 3 4 5 6 7 8 9
35