E) Pc Connection; F) Setting Up Sheet Holder; Connection Of Headphones - Classic Cantabile DP 210 Bedienungsanleitung

e) PC Connection

Instead of conventional MIDI ports, the digital piano has a modern USB port to connect it to a computer.
Proceed as follows:
• Switch off the digital piano.
• Then switch on your computer and wait until the operating system has started up completely.
• Connect the USB socket (42) of the digital piano to a free USB port of your computer via a suitable USB cable (not enclosed).
• Switch on the digital piano.
• Windows may recognise new hardware. The drivers needed are part of the operating system (at least Windows XP or newer
required). Follow the Windows instructions for installation.
There is no software included with the digital piano. However, you may use any programme that supports external digital
pianos/music keyboards via USB.

f) Setting up Sheet Holder

On the top of the digital piano, there is a sheet holder that only needs to be folded up. A bracket at the rear fastens the sheet holder
in its position.
g) Connection of Headphones
At the bottom of the digital piano, there are two jack plug sockets at
each of which commercial headphones can be connected.
Connection „1": The audio playback takes place via the headphones
and via the speakers in the digital piano at the same time.
Connection „2": Audio playback takes place via the headphones
only. The speakers of the digital piano are deactivated.
Proceed as follows for connection:
• Reduce the volume at the digital piano, turn the volume controller „VOLUME" all the way to the left counter-clockwise.
• Connect the headphones to one of the jack plug sockets.
• Set a low volume at the digital piano and check it e.g. by playing on the keyboard; carefully put on the headphones. Now adjust
the volume as you like.
Note:
If the volume is too high, there is the danger of hearing damage. Therefore, set the volume so that it feels comfortable
and is not too loud!
30